AVer NX8000 User Manual

Page 50

- Direct Link by IE

Using IE browser to connect to camera and view the real time video. Click Direct
Link by IE，

the IE browser will pop up and connect to camera. The video viewing

interface will be varied by different brand of camera.

- I/O Control

Sensor Setting

To setup sensor that is embedded on the

camera.

1. Click the drop-down list and select the

sensor ID number.

2. Enter sensor name in Name column
3. The system automatically detects the

camera and input relates information. In
the Content section, enter sensor
description.

4. In the test section, click Test to check

the sensor status. Red is high and
Green is low.

5. Click

to exit and accept the setting

and Cancel to exit without saving the
setting.

Relay Setting

To setup relay device that is embedded on

the camera.

1. Click the drop-down list and select the

relay ID number.

2. Enter relay name in Name column
3. The DVR system automatically detects

the camera and input relates
information. In the Content section,
enter relay description.

4. In the test section, click Test to trigger

relay. Red is high and Green is low.

5. Click

to exit and accept the setting

and Cancel to exit without saving the
setting.