AVer NX8000 - Manual (Page 70)

63
5.9.4 To Setup Send E-mail Setting:
Beside the Send Email check box, click Detail. In the E-mail Setting dialog box, click OK to
exit and save the setting and Cancel to exit without saving the setting.
(1)
(2)
(3)
(4)
(1) Mail Server
Enter the SMTP Server and port. If your e-mail system requires user identification, enable
Authentication
check box and enter User ID and Password.
(2) Mail
To check if it is working, click Test Account button.
From:
Enter the sender e-mail address.
To and CC:
Enter the recipient email address and separate it with comma or a semicolon
(;).
Subject:
Enter the message title.
Message:
Type the message.
(3) Email Notice Setting
Notice Interval: Set the period of time before it sends another e-mail notice.
Embedded image : Select the image size and set the number of frames.
Attach image when sensor is triggered:
When the sensor is triggered, the system will
capture the image and send the image to the certain e-mail address with the alarm
message.
(4) Modem Dial up Setting
If you are using dial up modem, enable Auto Dial up check box and select the modem
name. You may also set the time to disconnect automatically, just enable the Auto
Disconnect after
check box and set time.
5.9.5 To Setup FTP Setting:
1. Beside the File Transmission via FTP check box,
click Detail.
2. In the FTP Setting dialog box, enter the FTP IP, port,
user ID and password.
3. In Number of Pic text box, enter the number of
sequence images that want to send when file is
transmitting. The maximum number of picture can be
transmitted are 16.
4. In Upload image when sensor is triggered , select the camera that the images will be
capture and send when the sensor is triggered.