AVer NX8000 - Manual (Page 10)

3
2.3 Installing NX8032 and I/O card
1. Remove the PC case cover.
2. Remove 2 brackets that cover the PCI slots. Save the screws.
3. Connect the NX8032 card and I/O card with the connection cable.
4. Press the cards into the PCI-Ex1 slots firmly.
5. Secure the card with the screws.
I/Ocard
NX8032 Card
2.4 Connecting the Watchdog line
Connecting the NX8000 to the motherboard reset switch panel, enables the unit to restart
automatically and reset the system when an error has been detected.
1. Look for the labeled RESET SW switch lead and connect it to the NX8000 card reset pin.
2. Connect the supplied Watchdog line to the NX8000 card watchdog pin and the other end
to the motherboard RESET SW panel. If you are not sure, please refer to the
motherboard user manual.
3. You may now replace back the PC cover and connect all the cables.
Reset SW lead
Watchdog line
NX8000