AVer NX8000 User Manual
Page 40
33
Obtain an IP automatically (DHCP):
To use DHCP server assigning DVR server a IP
address.
Using the following IP address:
Assign a fixed IP address for DVR server
-
IP ADDRESS: Assign a constant IP address which a real IP addresses give from
ISP to DVR system.
i
Do Not assign the DVR to 1.0.0.0 network segment. It will ca use the DVR can not
access to Internet due to the un-recognize to 1.0.0.0 IP segment.
-
Mask: It is a entify the sub network and how many bits provide
room for dresses. Enter the subnet mask of the IP address which user has
assigned to DVR system.
-
GATEWAY: A network device act as a passageway to internet. Enter the network
gateway IP address
-
DNS: Domain Name Server translates domain names (such as www.abb.com.tw) to
ress of DNS if it is available.
(10) Login
Enable the conditions in Login section you want the system to automatically carry out.
-
Auto Login when OS start
Execute the NV DVR when the operating system is started.
-
Ask for password when login
Request to enter User ID and Password each time the NV DVR is executed.
-
Auto record when login
Automatically start video recording when the NV DVR is executed.
-
Login to compact mode
Switch to compact mode directly when the NV DVR is executed.
-
Silent Launch
Enable the DVR system minimizes on the system tray automatically right after start up.
-
Guest Mode
Automatically log in Guest mode when the NV DVR is executed. In guest mode, the
functions are limited to preview and playback only.
-
Default user
Automatically log in to the selected default user when the NV DVR is executed.
(11) Miscellaneous
Enable the conditions in Miscellaneous section you want the system to perform.