AVer IWH5000 series - Manual (Page 96)

88
(1) Name: Enter a name to identify the POS.
(2) Protocol: To select the protocol, click Setting button (see
Setup POS Device )
(3) Skip first: Set the number of lines you want to be removed
(4) Start Testing: Click to test POS setting. You will see a test result on the right side of
POS Mapping window.
(5) Port Setting: Select the Local or Remote port to where it is connected.
Local: Select the COM port number which is connected.
Remote: Use the UDP protocol for remote connection if POS
system can broadcast to Internet. Enter the IP
address of the remote station.
(6)
Setup…: Set the COM Properties. If you are not sure, please contact your POS
service provider.
(7) Map to Channel: Select to which camera number to display the transaction text.
(8) Text Filter: Enter the word you want to be removed.