AVer IWH5000 series - Manual (Page 196)

188
 Incremental Backup: Only backup the data that are not yet included in the archive
from last time.
- Network
Activate DVR remote system to access at the set time. After the appointed time, the
Network function will be disabled. If the Network function is already enabled, the Network
function will not be disabled when the appointed time has ended.
- Reboot
Restart the PC at the appointed time.
- Disable Alarm
Deactivate the alarm at the set time temporarily.
- Turn on Relay
Activate the relay at the set time. Number of relays are depending on the relays has
connected with DVR system.
3. Specify to either schedule it weekly or one time. Click  to make a selection.
4. Right click the colored blocks to set the schedule. In the Select time dialog box, click to
enable or disable the portion user want to set. Click OK to accept the setting and Cancel to
exit without saving the setting.
5. User also can click All to select all. To store the setting, click Update. To remove the settings,
click Clear. Click Cancel to exit without saving the setting.