AVer IWH5000 series - Manual (Page 177)

169
7.1.4 To Setup Remote System Setting
There are two type of remote setup mode – Basic Setting and Advance Setting. Select the setup
mode and click OK to enter setup window.
7.1.4.1 Basic Setting
Click OK to exit and save the setting and Cancel to exit without saving the setting. The setting
here applies to Remote DVR only.
i
Some of functions don
’t support for IP camera channel.
(1) Camera Name
Select the camera you want to adjust the settings.
(2) Enable
Set to enable/disable the selected camera. When there is no video source on the camera, we
suggest disabling it so that the system won’t detect it as video loss error.