AVer IWH5000 series - Manual (Page 135)

127
i
Make sure the backup folder and storage folder are not on the same drive.
- Enable Network
Activate DVR remote system to access at the set time. After the appointed time, the
Network function will be disabled. If the Network function is already enabled, the Network
function will not be disabled when the appointed time has ended.
- Reboot
Restart the PC at the appointed time.
i
Make sure the Windows operating system is set NOT to require you to login user
name and password.
- Disable Alarm
Deactivate the alarm at the set time temporarily.
- Turn on Relay #
Active the relay at the set time. If there are no Relays are connected, Turn on Relay #
function will not display in drag down list. The Relay number will depend on how many
relays are connected.
3. Specify to either schedule it weekly or one time. Click  to make a selection.
4. Right click the colored blocks to set the schedule. In the Select time dialog box, click to
enable or disable the portion user want to set. Click OK to accept the setting and Cancel to
exit without saving the setting.
5. User also can click All to select all. To store the setting, click Save. To remove the settings,
click Clear.
6. To end Schedule Setting, click OK to exit and accept the setting and click Cancel to exit
without saving the setting.