AVer IWH5000 series - Manual (Page 155)

147
5.9.5 To Setup Alarm Recording Setting
1. Next to the Start Recording check box, click Detail.
2. In the Alarm Recording Setting dialog box, select the camera to enable/disable video
recording. Enable All to select all cameras.
3. In the Frame Rate selection, select As Setting to record the number of frames based on the
Recording Setting or Max to record
the
maximum of frames based on the available speed.
4. In the Stop Recording after text box, set the number in second for the program to continue
recording after the alarm has ended.
5. Click OK to accept the new settings and Cancel to exit without saving.