AVer IWH5000 series - Manual (Page 187)

179
 IP Camera
Select the camera from remote DVR servers to modify settings. In the Camera Setting window,
click Update to save and apply the new settings, click Cancel to exit without saving, and click
Default1/ Default2 to revert back to original factory settings.
(1) Camera Icons
Select the camera number you want to adjust the video setting. To select all the cameras, enable
the ALL check box. To select more than one camera, Right click on the camera icon. To select one
camera only, Left click on the camera icon. The camera icon turns red when it is selected.
(2) Enable
Set to enable/disable the selected camera. When there is no video source on the camera, we
suggest disabling it so that the system won’t detect it as video loss error.
(3) Camera
- Display
Enable/disable to show the video. Even if the video of the selected camera is hidden you can
still record the video and preview it in playback mode.
- Name
Change the camera name.
- Description
Add a short comment.