AVer IWH5000 series - Manual (Page 158)

150
5.9.9 To Setup CMS Setting
Next to the Send to CMS check box, click Detail.

CMS: Select the camera to enable/disable sending the video to CMS.
 Matrix: Select the camera to enable/disable sending the alarm event video to CMS. The CMS
site need to setup a matrix channel to receive the alarm event from DVR server site(please
refer to CMS manual for detail)
 Use transmitting IP address list: Mark to enable and Set specific IP address of CMS server
to receive the alarm video. When this function has enabled, only the IP address of CMS has
added in Allow list can receive the alarm video from the this DVR server. The allow list is up to
32 IP addresses.