AVer IWH5000 series - Manual (Page 199)

191
- POS Keyword: Enable/disable to scan the data from the POS if it matches the keyword.
- Alarm Button: Enable/disable to active manual alarm function. To define alarm
message of manually alarm trigger. Click alarm button and select the alarm button # and
fill in the description of alarm button.
6. In (5) Alarm Reset, click the camera number (use  and  to select the alarm) to set the
reset condition of alarm. Once alarm is reset, all alarm action will stop at the moment. If the
sensor normal status is high, set the sensor condition to low.
- Alarm Reset Time: Set a time for the alarm auto reset. When an alarm happen such as
motion detected and video loss, the alarm will reset at the alarm reset time.
7. In (6) Action, you may now set the alarm action for the system to perform when the alarm
condition is activated.