AVer IWH5000 series User Manual
Page 205
197
Name
Function
(6) Network
Enable/disable remote system access. This feature allows you to
access DVR server from a remote location via internet connection.
(7) Setup
Configure the Remote Console setting. (see also
(8) PTZ
Access PTZ control panel. Beside PTZ camera, DVR system also
support mega pixel IP camera.(see
(9) Preview
Switch to Preview/Advanced mode. This allows you to view live
camera display.
(10) Playback
Switch to Playback mode. This allows you to view the recorded video
file. (see
(11) Status Bar
Display the current date, time and hard disk free space.
(12) Camera ID
Show the number of cameras that are being viewed. When you are in
single screen mode, click the camera ID number to switch and view
other camera.
(13) Snapshot
Capture and save the screen shot either in *.jpg or *.bmp format.
(14) Event log
Show the record of activities that take place in the system. To filter
the records, select and click the option button to only display Event,
System, Operation, Network or POS.
(15) Auto Scan
Click it to start channel auto cycle display.
(16) Full screen
Use the entire area of the screen to only display the video. To return,
Right click the mouse or press ESC on the keyboard.
(17) Alarm
Alert and display warning info. Only Administrator-level can reset and
turn on, off and trigger the Sensor and Relay by right-clicking the item
in the Sensor and Relay list.
(18) De-interlace
To enhance the video quality. Set the de-interlace mode to #1, if you
are capturing motionless picture and select #2, if it captures lots of
movement.
(19 Turbo
To improve the smoothness of live video. Turbo button is disabled
（
） in default. When turbo button is enabled or disabled that
applies to whole DVR system, not the specific channel. When restart
or shutdown DVR/NVR
system, the current turbo status won’t be
saved by DVR/NVR system.
(20) Volume
Enable/disable the sound.