AVer IWH5000 series User Manual
Page 197
189
Alarm Setting
In the Alarm Setting window, click Add to insert and set new alarm setting, click Delete to remove
the selected alarm setting, click OK to exit and save the setting, Cancel to exit without saving, and
Default to revert back to original factory settings.
To set the Alarm Setting:
1.
Click Add to insert and set a new alarm setting. Click the items in the (7) Alarm Setting List,
if you want to modify the alarm setting.
2.
In (1) Alarm Setting number/Name/Description, display the selected alarm setting number
in the list below. Enter alarm name and description.
3.
In (2) Enable Time, the number from 00 to 23 represent the time in 24-hour clock. Select the
time and click the block you want to enable or disable the alarm function. When it is
“disable”
the color of the block turns white.
4.
In (3) Conditions
, you can set “Trigger if any” to activate if it falls to one of the conditions or
“Trigger if all” to activate if it falls to all conditions.
-
In Camera section, select and click on the camera number in Motion Detected and
Video Loss to set the condition for the system to alarm.
-
In Missing and Suspicious Object/Scene, click the camera number and select the
certain object on the screen (right click on camera number for detailed setting)), and
when the certain object is missing or doubtful, the system will alarm. (see also
) In Scene Change, when the camera has been moved, the system will alarm,
too.