AVer IWH5000 series - Manual (Page 203)

195
4. In the Stop Recording after text box, set the number in second for the program to
continue recording after the alarm has ended.
5. Click OK to accept the new settings and Cancel to exit without saving.
To Setup Alarm SOP
Next to the Alarm SOP check box, click Detail. In the step text boxes, type the standard
protocol when the alarm is activated. When the alarm is activated, the Standard Operation
Procedure dialog box will appear. Just click Next to see the next instruction, Back to see the
previous instruction, Finish to end and Abort to terminate.
To Setup CMS Setting
Next to the Send to CMS check box, click Detail. In the CMS Setting, select the camera to
enable/disable sending the video to CMS. Enable All to select all cameras. Then, click OK
to accept the new settings and Cancel to exit without saving.