AVer IWH5000 series - Manual (Page 180)

172
(2) Delete event and alarm log after
If you want the system to automatically erase the event and alarm log files after a certain days,
enable the Delete event and alarm log after check box and enter the numbers of days in Days
text box.
(3) Video Standard
Change and select the proper video system according to your camera video system. If the video
system setting is wrong, the video would appear abnormal.
(4) Attention Please
Check the attentiveness of the person who is monitoring the system. You may set the number of
times the Attention dialog box to appear in a day in Times per day text box. When this feature is
enabled, the Attention dialog box would appear. The person who is monitoring the system must
enter the same number that appears from the left box at the right text box and then click OK.
(5) AutoScan Period
Set the TV out display time gap from 3 to 10 sec. before it switches to the next camera.
(6) Login
Enable the conditions in Login section you want the system to automatically carry out.
- Auto record when login
Automatically start video recording when the DVR is executed.
- Auto start Network when login
Automatically connect to network when the DVR is executed.
- Login to Compact mode
Switch to compact mode directly when the DVR is executed.
- Guest Mode
Automatically log in Guest mode when the DVR is executed. In guest mode, the functions are
limited to preview and playback only.