Canon FAX-L1000 - Manual (Page 63)

2-7
FAX-L1000 Chapter 2: Operating Instructions
2. BASIC OPERATION
2.1 Copying
(1) Set the recording paper
NOTE
Refer to Chapter 5, 1.4 Assembling the Fax, Loading Paper in Paper
cassettes 1 and 2 for the method of setting the recording paper.
(2) Set the document face up on the document feeder tray
Adjust the document guides to match the width of the document. With a long document,
open the document extension tray.
Make sure the document is below the load limit marks for A4/LTR and B4/LGL sizes.
(3) Document insertion
Insert the document until it makes contact with the stopper. A “beep” will sound.
NOTE
When the document is set, the amount of memory used will be displayed, and then
a message will appear indicating that the document has been set.
Figure 2-6 Display for document set
(4) Press the Copy button.
(5) Open all three of the one-touch panels and select the recording paper with the ▲ or ▼
button.
When using the displayed recording paper, simply proceed to the next step.
(6) Set the number of copies with the numeric key. (Max. 99 copies.)
(7) Press the
Start/Scan button.
MEMORY IN USE
36%
DOCUMENT READY