Canon FAX-L1000 - Manual (Page 410)

5-52
FAX-L1000 Chapter 5: Appendix
b) Installation
b-1) Unpacking
Check that the box contains the memory board.
b-2) Preparation
Perform the operations below before attaching the memory boards.
(1) Output all image data if there is any remaining in image memory.
When attaching memory boards, it is necessary to disable memory backup,
so the complete contents of image memory will be cleared.
Output all image data if there is any remaining in image memory.
(2) Disconnect the power cord of the fax unit at the power source.
(3) Disconnect the modular jack cord (telephone line) from the fax.
(4) Remove the one screw and remove the right cover.
Figure 5-7 Preparations for Installation 1
(5) Remove the six screws and remove the shield cover.
Figure 5-8 Preparations for Installation 2
Right cover
Shield cover