Canon FAX-L1000 - Manual (Page 293)

4-41
FAX-L1000 Chapter 4: Maintenance and Service
"ENTER DAC"
Cause: The department access code is not entered to send document.
Solution: Enter the department access code.
"HANG UP PHONE"
Cause: The handset was left off the hook after the completion of transmission or
reception.
Solution: Put the handset back on the handset rest.
"MEMORY FULL" (#0037)
Cause: The image data storage memory area is full.
Solution: (1) Output the image data stored in memory.
(2) If tried to send a document with “
Ultra Fine ”, “ Super Fine ”
or “ Text/Photo ”, try sending by direct sending, or set “ Fine ”
or “ Text ” and send by memory sending.
"MEMORY FULL PLEASE WAIT"
Cause: The image data storage memory area is full.
Solution: Wait until the current document transmission has completed.
"NO ANSWER"
Cause: The other party did not answer.
Solution: (1) Start the procedure again from the beginning and try again.
(2) If the connection fails again, make sure the other party is
using a G3-compatible fax machine.
"NO CONFID. TX" (#0033, #0034)
Cause: (1) The other fax machine may not have the confidential function.
(2) ITU-T subaddress/password does not match.
(3) It is possible that the other fax has no free memory.
Solution: Check the above items for the other fax.
"NO DOC. STORED"
Cause: Tried to check the contents of the memory but no documents are currently
stored in the memory.
Solution: No need.
"NO ORIGINAL RELAY TX" (#0035, #0036)
Cause: (1) It is possible that the other fax has no relay function.
(2) ITU-T subaddress/password does not match.
(3) It is possible that the other fax has no free memory.
Solution: Check the above items for the other fax.