Canon FAX-L1000 - Manual (Page 481)

5-123
FAX-L1000 Chapter 5: Appendix
ISDN BASIC Redial Code
No. Function Selecting range Default setting
01-128 Redial 1001-1131 See d) SSSW default
setting
ISDN BASIC G4/G3 Fallback
No. Function Selecting range Default setting
01-128 G4/G3 fallback 1001-1131 See d) SSSW default
setting
ISDN BASIC Speech Fallback
No. Function Selecting range Default setting
01-128 Speech fallback 1001-1131 See d) SSSW default
setting
[Redial]
If a D-channel protocol error occurs with an outgoing call, the 4-digit error code displayed
on the LCD of the machine’s this switch or on the report can be registered so that, from the
next outgoing call onwards, if the same error occurs, the machine will redial.
[G4/G3 Fallback]
If a D-channel protocol error occurs with an outgoing G4 call, the 4-digit error code
displayed on the LCD of the machine’s switch or on the report can be registered so that,
from the next outgoing call onwards, if the same error occurs, the machine will make an
outgoing G3 call after making one public call.
[Speech Fallback]
If a D-channel protocol error occurs with an outgoing G3 call with Bearer Capability
“3.1kHz audio,” the 4-digit error code displayed on the LCD of the machine’s switch or on
the report can be registered so that, from the next outgoing call onwards, if the same error
occurs, the machine will make an outgoing G3 call with Bearer Capability “speech” after
making one public call.
NOTE
The error codes registered in #4C ISDN BASIC “ Redial Code ,” “ G4/G3
Fallback ,” and “ Speech Fallback ” can contain a maximum of 128 characters
each.
NOTE
Please do not clear or otherwise change the value registered in #4C ISDN
BASIC “ Redial Code ,” “ G4/G3 Fallback ,” and “ Speech Fallback .” It is
feared that trouble with communication will occur.