Canon FAX-L1000 User Manual
Page 604
5-246
FAX-L1000 Chapter 5: Appendix
3.Defective paper feeder driver board
Action:
Replace the paper feeder driver board.
4.Defective paper size detection board
Action:
Replace the paper size detection board.
5.Defective ECNT board.
Action:
Replace the ECNT board.
6.Defective SCNT board
Action:
Replace the SCNT board.
7.Defective TWINS board
Action:
Replace the TWINS board.
8.Defective PDL board
Action:
Replace the PDL board.
"LOAD
is in the envelope feeder.
1.Damaged envelope detection lever
Action:
Replace the lever.
2.Defective envelope feeder driver board
Action:
Replace the envelope feeder driver board.
3.Defective ECNT board
Action:
Replace the ECNT board.
4.Defective SCNT board
Action:
Replace the SCNT board.
5.Defective TWINS board
Action:
Replace the TWINS board.
6.Defective PDL board
Action:
Replace the PDL board.
"CLOSE FACE-UP TRAY" message appears when the face-up tray is closed
at the time of using duplexing unit
1.Spring is out of position
Action:
Remove the right cover of the duplexing unit and check the spring. If the spring is
out of position, set it in the correct position.