Canon FAX-L1000 User Manual

Page 294

4-42

FAX-L1000 Chapter 4: Maintenance and Service

"NO RX PAPER" (#0012)

Cause:

Declares that the other fax has no recording paper for DIS.

Solution:

Contact the other party and have them load paper into their fax.

"NO TEL#" (#0022)

Cause:

No one-touch speed dialing, coded speed dialing, or group dialing
telephone number is registered.

Solution:

"NOT AVAILABLE NOW"

Cause:

You pressed an one-touch speed dialing, coded speed dialing, or group
dialing, that is not registered for the feature you are trying to use.

Solution:

Check the contents of the one-touch speed dialing, coded speed dialing, or
group dialing registration, then try again.

"NOT FOUND, TRY AGAIN"

Cause:

The box number you specified does not exist.

Solution:

Try again with a different number.

"OUTPUT TRAY FULL"

Cause:

The output tray is full of paper.

Solution:

Pick up the printed pages on the tray.

"PASSWORD POLL REJECT"

Cause:

You set up a polling box for polling sending with an ITU-T password, but
the other party’s fax unit does not support use of an ITU-T password for
polling receiving.

Solution:

Transmit without an ITU-T password.

"PASSWORD TX REJECT"

Cause:

You attempted to send a document with an ITU-T password, but the other
party’s fax unit does not support use of an ITU-T password for receiving.

Solution:

Transmit without an ITU-T password.

"PRT ALT. PAPER SIZE? YES=(

✽

) NO=(#)"

Cause:

The size of the available recording paper does not match the size of the
document waiting to be printed.

Solution:

If you do not mind printing on a different paper size, press ✽ button. If
you want to print the correct paper size, press

Stop

button and install the

correct size paper. Then press

Start/Scan

button.