Canon FAX-L1000 User Manual

Page 561

5-203

FAX-L1000 Chapter 5: Appendix

3.7.3 Technical information

a) Specification

Interface

10Base-T Ethernet, 100Base-TX Ethernet

CPU

TOSHIBA TMPR3904AF

LAN controller

TOSHIBA TC35815AF

Transceiver

TDK TSC78Q2120

Flash ROM

2MB

DRAM

2MB

Dimensions

139.5(W)

93.0(D)

24.7(H)mm (excluding mounting materials

and connector.)

Weight

About 0.1kg

Power supply

DC5V (supplied from the printer)

Protocol

IPX/SPX, TCP/IP, AppleTalk, NetBIOS

Frame Type

IPX/SPX:802.2, 802.3, Ethernet II, 802.2 SNAP, AUTO SENSE
TCP/IP:Ethernet II
AppleTalk:802.2 SNAP(Phase II)
NetBIOS:802.2

Print application

IPX/SPX:NDS PServer, Bindery PServer, NPrinter, RPrinter
TCP/IP:LPD/UPP
AppleTalk:APS
NetBIOS:MPS

b) Operations

It is necessary to connect a FAX-L1000 Printer Kit to this board in order to use it. If the
board is connected, the main unit can be used as a network printer.
Characteristics of this board are as follows.
•Automatic switching interface for 10Base-T Ethernet and 100Base-TX Ethernet.
•Automatic switching and printing with the following protocols: IPX/SPX(Netware), TCP/

IP, AppleTalk, NetBEUI(NetBOIS).

•Device configurations and management are supported over Telnet and NetSpot, a graphical

user interface and SNMP-based printer management utility shipped with the product which
supports Windows98, 95, WindowsNT, Solaris 2.X, and Macintosh platforms.

•Can generate a Test Print which lists the current protocol configuration of the ethernet

board and send it to the connected printer.

•Firmware of the ethernet board is upgradable with NetSpot.