Canon FAX-L1000 - Manual (Page 468)

5-110
FAX-L1000 Chapter 5: Appendix
(4) Fasten the shield cover of the SCNT board in place with the six screws.
(5) Fasten the right cover in place with the one screw.
(6) Attach the modular spacers into the extension phone jack and telephone line jack.
(7) Connect the ISDN cable (Cable 4) to the ISDN line jack marked “ISDN” on the kit.
Then connect the other end of the cable to the wall ISDN line jack.
(8) If a FAX-L1000 Printer kit (Option) or an FAX-L1000 Network Printer Upgrade Kit
(Option) is installed, connect the IEEE 1284 compliant parallel interface cable or the
network cable to the options.
(9) Plug in the fax.
b-5) All clear operation
(10) Perform the All clear operation.
Figure 5-53 All Clear Operation
While waiting to return to the ready state after executing “ All clear ”, please
do not press the Stop button. Doing so may cause a malfunction
afterwards.
Data Registration
Standby
Set
#
SERVICE MODE
#8 CLEAR
Set
#8 CLEAR
ALL
#8 CLEAR
CLEAR OK PLEASE WAIT
Display #8 CLEAR by
pressing
or button
Display ALL by
pressing
or button