Camera, Removing the camera, Replacing the camera – Dell Latitude E4300 (Late 2008) User Manual
Page 9
Back to Contents Page
Camera
Dell™ Latitude™ E4300 Service Manual
If you ordered a camera with your computer, the camera is already installed.
Removing the Camera
1.
Follow the instructions in
What You Need to Know For Your Safety
.
2.
Remove the LED dashboard cover (see
Removing the LED Dashboard Cover
).
3.
Remove the keyboard (see
Removing the Keyboard
).
4.
Remove the display assembly (see
Removing the Display Assembly
).
5.
Remove the display bezel (see
Removing the Display Bezel
).
6.
Remove the display panel (see
Removing the Display Panel
).
7.
Remove the display hinges (see
Removing the Display Hinges
).
8.
Lift the camera board from the display back cover.
9.
Free the display/camera cable assembly from the display hinges.
Replacing the Camera
1.
Align the camera board to the alignment posts on the display cover.
2.
Re-thread the display cables through the hinges.
CAUTION:
Before working inside the computer, read the safety information that shipped with the computer. For additional safety best practices
information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface
(such as the back panel) on the computer.
1 alignment post (2)
2 camera board
3 display/camera cable assembly
NOTE:
This procedure assumes that you have completed the removal procedure first.