Dell Latitude E4300 (Late 2008) - Manual (Page 35)

Back to Contents Page
Latitude ON™ Card
Dell™ Latitude™ E4300 Service Manual
Removing the Latitude On Card
Replacing the Latitude On Card
If you ordered a Latitude On™ card with your computer, the card is already installed. It is located in the memory bay.
Removing the Latitude ON Card
1. Follow the instructions in What You Need to Know For Your Safety .
2. Close the display and turn the computer upside-down.
3. Loosen the captive screws on the memory cover.
4. Remove the memory cover.
5. Remove the M2 x 3-mm screw securing the Latitude ON card to the computer base.
6. Disconnect the two Latitude ON cables.
7. Lift the Latitude On card from the memory bay.
CAUTION: Before working inside the computer, read the safety information that shipped with the computer. For additional safety best practices
information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
1 Latitude ON cables 2 Latitude ON card