Dell Latitude E4300 (Late 2008) - Manual (Page 36)

Replacing the Latitude ON Card
1. Reseat the Latitude ON card in the memory bay.
2. Reconnect the black and gray Latitude ON cables to their respective connectors, as indicated on the card.
3. Replace the M2 x 3-mm screw to secure the Latitude ON card to the computer base.
4. Replace the memory cover.
5. Follow the instructions in After Working on Your Computer .
Back to Contents Page
1 M2 x 3-mm screw 2 Latitude ON card
NOTICE: Install the Latitude ON card into the compartment shown in the above photograph. Do not install it in any other location.