Replacing the display panel, Replacing the display hinges – Dell Latitude E4300 (Late 2008) User Manual
Page 21
6.
Lift the display panel away from the display back cover and rotate it forward.
7.
Use the pull-tab to disconnect the LCD flex-cable connector from the inverter connector.
Replacing the Display Panel
1.
Reconnect the LCD flex-cable connector to the inverter connector.
2.
Replace the display panel inside the display back cover.
3.
Replace each display panel bracket (one on each side of the panel), and then secure it by replacing the two M2 x 3-mm screws.
4.
Replace the display bezel (see
).
5.
Replace the display assembly (see
Replacing the Display Assembly
6.
Follow the instructions in
After Working on Your Computer
.
Replacing the Display Hinges
1.
Re-thread the display cables through the hinges.
2.
Reseat the hinges, and then replace the four M2.5 x 5-mm screws (two per side) that secure the display hinges to the display cover.
1 display panel 2 display panel brackets (2)
1 LCD flex-cable connector 2 display panel
NOTE:
This procedure assumes that you have completed the removal procedure first.
NOTE:
This procedure assumes that you have completed the removal procedure first.