Dell Latitude E4300 (Late 2008) - Manual (Page 14)

1. Reseat the processor thermal-cooling assembly on the underside of the system board.
2. In consecutive order, tighten the four captive screws labeled "1" through "4."
3. Replace the system board (see Replacing the System Board Assembly ).
4. Replace the optical drive (see Replacing the Optical Drive ).
5. Replace the system fan (see Replacing the System Fan ).
6. Replace the palm rest (see Replacing the Palm Rest ).
7. Replace the display assembly (see Replacing the Display Assembly ).
8. Replace the keyboard (see Replacing the Keyboard ).
9. Replace the LED dashboard cover (see Replacing the LED Dashboard Cover ).
10. Replace the hard drive (see Replacing the Hard Drive ).
11. Follow the instructions in After Working on Your Computer .
Back to Contents Page
NOTE: This procedure assumes that you have completed the removal procedure first.