Dell Latitude E4300 (Late 2008) - Manual (Page 58)

6. Replace the system fan (see Replacing the System Fan ).
7. Replace the display assembly (see Replacing the Display Assembly ).
8. Replace the keyboard (see Replacing the Keyboard ).
9. Remove the LED dashboard cover (see Removing the LED Dashboard Cover ).
10. Replace the hard drive (see Replacing the Hard Drive ).
11. Follow the instructions in After Working on Your Computer .
12. Flash the BIOS (see Flashing the BIOS ).
13. Enter the system setup program to update the BIOS on the new system board with the computer Service Tag. For information on the system setup
program, see the Dell Technology Guide on your computer or at support.dell.com.
Back to Contents Page
NOTICE: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in
damage to the computer.
NOTE: If you use a BIOS update program media to flash the BIOS, press before inserting the media in order to set the computer to boot from the
media for one time only. Otherwise, you must enter the system setup program to change the default boot order.