Dell Latitude E4300 (Late 2008) - Manual (Page 46)

1. Reseat the radio switch board into the plastic cage on the system board.
2. Replace the M2 x 3-mm screw securing the radio switch board to the plastic cage on the system board.
3. Reconnect the radio switchboard cable.
4. Reconnect cables from WLAN, WWAN, and/or Latitude ON™ card (if installed in your computer) to the radio switch board.
5. Replace the palm rest (see Replacing the Palm Rest ).
6. Replace the display assembly (see Replacing the Display Assembly ).
7. Replace the keyboard (see Replacing the Keyboard ).
8. Replace the LED dashboard cover (see Replacing the LED Dashboard Cover ).
9. Follow the instructions in After Working on Your Computer .
Back to Contents Page
1 black cable (from Latitude ON card) 2 grey cable (from Latitude ON card)
3 black WLAN antenna (from LCD) 4 grey WLAN antenna (from LCD)
5 white WLAN antenna (from LCD) 6 white relay cable (to WLAN card)
7 grey relay cable (to WLAN card) 8 black relay cable (to WLAN card)