Dell Latitude E4300 (Late 2008) - Manual (Page 16)

1. Position the DC -in power assembly in the computer base, aligning the guides on the connector sides with the base.
2. Reconnect the DC -in power assembly to the connector on the underside of the system board.
3. Replace the system board (see Replacing the System Board Assembly ).
4. Reconnect and reseat the coin-cell battery in the system board (see Replacing the Coin-Cell Battery ).
5. Reconnect the speaker assembly cable.
6. Reconnect the smart card cable.
7. Replace the optical drive (see Replacing the Optical Drive ).
8. Replace the system fan (see Replacing the System Fan ).
9. Replace the palm rest (see Replacing the Palm Rest ).
10. Replace the keyboard (see Replacing the Keyboard ).
11. Replace the display assembly (see Replacing the Display Assembly ).
12. Replace the hard drive (see Replacing the Hard Drive ).
13. Follow the instructions in After Working on Your Computer .
Back to Contents Page