Dell UPS 1000T - Manual (Page 98)

ULNM with Microsoft Hyper-V or Hyper-V Server 98
Remote access (for Hyper-V Server or Hyper-V Manager on Windows 2008)
– From a remote machine, you can type one of the following URLs in a Web browser:
http://:4679/
Or
https://:4680/
SSL Mode
1 In SSL mode, click Yes to accept the certificate.
2 Login (admin) / Password (admin) are default access entries. Type the login and password and click
Login (see Figure 77).
Figure 77. Login Page
Configuration
When started, the application automatically performs a discovery using the “Quick Scan” option for the
following UPSs:
• Serial line connected UPSs (RS-232 or USB)
The discovered UPS connected through an RS-232 or USB connection is automatically assigned as
the Power Source. The status icon is green .
• Networked UPSs through broadcast within a few seconds (Optional H910P Dell Network
Management Card).
The discovered UPSs connected through a network connection are not automatically assigned as
the Power Source. You must select the node and click Set as Power Source. The status icon
becomes green .
• The nodes discovered by “Quick Scan” are displayed in Settings > Auto Discovery.
0120_3-Dell ULNM UG.book Page 98 Saturday, November 2, 2013 5:34 PM