Dell UPS 1000T - Manual (Page 97)

ULNM with Microsoft Hyper-V or Hyper-V Server 97
Dell ULNM Installation Prerequisites
The prerequisites for Dell ULNM installation are described in “Installation Prerequisites” on page 13.
Also see “Compatibility” on page 10.
Dell ULNM Network Configuration Prerequisites
All hardware elements must have an operational network configuration that allows free dialog between
them. Connections through the following ports must be authorized within the firewall of the main
operating system:
• Connections on tcp port 4679 and 4680 to enable a remote access for supervision and configuration
through Web browser. These ports are reserved at IANA (http://www.iana.org/).
• Connections through TCP port 80 must be opened as a destination port (for output) on the machine
hosting Dell ULNM. (This is in order to enable communication between the Dell ULNM and the Dell
Network Management Card)
To configure network parameters of the main operating system, please refer to the operating system
user’s manual.
Dell ULNM Installation (Hyper-V Server and Windows Server 2008)
To install the Dell ULNM on Hyper-V Server and Windows Server 2008:
1 Download the latest version of Dell ULNM Windows version package from Dell's Web site
(http://www.dellups.com/) and choose the Windows version of Dell ULNM.
2 Copy the package on your system.
3 Execute the package from the DOS Windows command and navigate to the directory where you
placed the Dell UPS Local Node Manager Server 2008 files.
4 Follow the Dell ULNM installation instructions in the Installation chapter of this document
beginning on page page 13.
Using Dell ULNM with Hyper-V Server R1/R2 or Hyper-V Manager
This section provides an operation quick reference information for using the Dell ULNM with Hyper-V
Server R1 and R2 or Hyper-V Manager after installation is completed. More detailed operation
information is available beginning on page 31 with the Configuration chapter.
Local Access (for Hyper-V Manager on Windows 2008)
– From the system where Dell ULNM is installed, you can use the following shortcut:
Start > Programs > Dell > UPS Local Node Manager >Open Dell UPS Local Node Manager
0120_3-Dell ULNM UG.book Page 97 Saturday, November 2, 2013 5:34 PM