Dell UPS 1000T - Manual (Page 42)

Configuration 42
Use Case 2
To save battery backup time, you want to perform load shedding. You want to stop your computer after a
predefined time.
• Configure a Shutdown timer value on Dell ULNM#1. This configuration parameter is available from
Settings > Shutdown > Edit Shutdown Configuration
.
Architecture #2
This section provides shutdown use cases for a network-attached UPS through Web SNMP Card (see
Figure 24).
Figure 24. Architecture #2 Schema
Use Case 1
You want to keep all your computers alive as long as possible.
• This is the default configuration for the Dell ULNM and the Dell Network Management Card.
– The Dell ULNM default configuration is available from
Settings > Shutdown > Edit Shutdown Configuration
.
– The Dell Network Management Card default shutdown configuration is available from
UPS > Shutdown Configuration
, as illustrated in Figure 25.
0120_3-Dell ULNM UG.book Page 42 Saturday, November 2, 2013 5:34 PM