Dell UPS 1000T - Manual (Page 141)

ULNM with KVM Virtualized Architecture 141
Figure 102. RHEL 4 Virtual Machine Monitor
Dell ULNM Installation Prerequisites
The prerequisites for Dell ULNM installation are described in “Installation Prerequisites” on page 13.
Also see “Compatibility” on page 10.
Dell ULNM Network Configuration Prerequisites
All hardware elements must have an operational network configuration that allows them to
communicate freely with each other.
Ensure that the following TCP/UDP ports are enabled on KVM hypervisor firewall:
• Connections on tcp port 4679 and 4680 to enable a remote access for supervision and configuration
through the Web Browser. These ports are reserved at IANA (http://www.iana.org).
• Connections through TCP port 80. It must be opened as a destination port (for output) on the
machine hosting the Dell ULNM.
0120_3-Dell ULNM UG.book Page 141 Saturday, November 2, 2013 5:34 PM