Dell UPS 1000T - Manual (Page 105)

ULNM with VMware ESX Server 4.0 /4.1 105
For the automatic VM boot on VMware ESX start-up:
• From the Virtual Infrastructure Client interface, select Virtual machine startup / shutdown>
Configuration > Properties > Start and stop VMs with the system
and tick Enable.
• On the Properties page, you can define the startup order of your VMs.
– Start and Stop VMs with the system: Enabled
– Default Startup Delay: n Seconds
– Default Shutdown Delay: n Seconds
– Startup Order: Automatic Startup
This configuration is illustrated in Figure 82.
Figure 82. vCenter Page
Dell ULNM Installation Prerequisites
The prerequisites for Dell ULNM installation are described in “Installation Prerequisites” on page 13.
Also see “Compatibility” on page 10.
0120_3-Dell ULNM UG.book Page 105 Saturday, November 2, 2013 5:34 PM