Dell UPS 1000T - Manual (Page 117)

ULNM with VMware ESXi Server 4.0/4.1/5.0 117
Figure 90. Virtual Machine Startup and Shutdown
4 Select VIMA/vMA guest machine and click Edit to configure, as shown in Figure 90.
Startup Settings
• Click Use specified settings
• Set Startup delay - 120 Seconds
Shutdown Settings
• Click Use specified settings
• Shutdown delay - 120 seconds
For the automatic VM boot of other guest machines on VMware ESXi start-up:
• From the Virtual Infrastructure Client interface, select Virtual machine startup / shutdown>
Configuration > Properties > Start and stop VMs with the system
and check Enable.
• On the Properties page, you can define the startup order of your VMs:
– Start and Stop VMs with the system: Enabled
– Default Startup Delay: n seconds
– Default Shutdown Delay: n seconds
– Startup Order: Automatic Startup
0120_3-Dell ULNM UG.book Page 117 Saturday, November 2, 2013 5:34 PM