Dell UPS 1000T - Manual (Page 29)

Installation 29
Command Line Installation
To install from the command line:
1 At the command line prompt, type the command (as root):
$ dpkg -i ulnm-linux_X.Y.Z.deb
Example command line installation:
$ dpkg -i ulnm-linux_0.01.003-1_i386.deb
(Reading database ... 352242 files and directories currently
installed.)
Preparing to replace ulnm-linux 0.01.003 (using .../ulnm-
linux_0.01.003-1_i386.deb)...
Unpacking replacement ulnm-linux ...
Setting up ulnm-linux (0.01.003)...
2 When the installation is completed, open a Web browser with the following URL:
http://<@IP>:4679/ (where <@IP> is the IP address of the machine hosting the Dell ULNM)
Generic installation on Linux
If your system does not derive from Red Hat (.rpm) or Debian (.deb), you can install Dell ULNM using
the generic package.
NOTE:
This method is only supported from the command line.
To install from a command line in interactive mode:
1 Use the following command from where the generic installer is located (as root):
$ ulnm-linux-0x_0x_000x-i386 -install
2 For silent installation, add the “silent” parameter (as root):
$ ulnm-linux-0x_0x_000x-i386 -install -silent
3 When the installation is completed, open a Web browser with the following URL:
http://<@IP>:4679/ (where <@IP> is the IP address of the machine hosting the Dell ULNM)
0120_3-Dell ULNM UG.book Page 29 Saturday, November 2, 2013 5:34 PM