Dell UPS 1000T - Manual (Page 27)

Installation 27
Linux Installation
Dell ULNM for Linux is available both in native package form (.deb or .rpm) and as a generic installer for
Command Line Interface (CLI).
Native Installation on a Red Hat, Suse, Mandriva, or Derivative System
Graphical Installation
To install graphically:
1 Double-click the Dell UPS Local Node Manager.rpm package.
2 The system prompts for the root password. Enter the root password. The system launches a graphical
front end, such as Red Hat's package Installer, as shown in Figure 11.
Figure 11. Linux RPM Graphical Package
Command Line Installation
To install from the command line:
1 At the command line prompt, type the command (as root):
$ rpm -i ulnm-linux_X.Y.Z.rpm
Example command line installation:
$ rpm -ivh ulnm-linux-0.01.003-1.i386.rpm
Preparing... ########################################### [100%]
1:ulnm-linux ########################################### [100%]
2 When the installation is completed, open a Web browser with the following URL:
http://<@IP>:4679/ (where <@IP> is the IP address of the machine hosting the Dell ULNM)
0120_3-Dell ULNM UG.book Page 27 Saturday, November 2, 2013 5:34 PM