beautypg.com

Acronis Snap Deploy 4 - User Guide User Manual

Page 98

background image

98

Copyright © Acronis International GmbH, 2002-2012

Specify a driver storage to search for HAL and storage device drivers during the automatic

search-and-install procedure. You can add network locations and enable a search of removable

media for drivers.

Adding a driver storage

3. [Optional] Specify the mass-storage driver.

If the target hardware has a specific mass-storage controller (such as a SCSI, RAID, or Fibre

Channel adapter) for the hard disk, explicitly specify the appropriate driver for that controller.

The driver will be installed in any case, bypassing the automatic driver search-and-install

procedure.
Use this option only if the automatic search-and-install procedure was unsuccessful.

Tip: When deploying the system to a virtual machine that uses SCSI hard drive controller, make sure to

specify SCSI drivers for the virtual environment. For example, VMware requires Buslogic or LSI logic drivers.

Use drivers bundled with your virtualization software or download the latest driver versions from the

software manufacturer’s Web site.