Acronis Snap Deploy 4 - User Guide - Manual (Page 73)

73 Copyright © Acronis International GmbH, 2002-2012
Also, machines with UEFI architecture have a special ESP partition (EFI System partition). If you are deploying a
UEFI machine image to another UEFI machine, you should deploy ESP partition as well. Otherwise, the target
machine will be non-bootable after deployment. When deploying a UEFI machine image to a BIOS machine, it is
not necessary to deploy the ESP partition.
Selecting disks and volumes to image
Limitations
The following volumes cannot be included in the master image:
 Dynamic disks
 Linux GPT disks on UEFI architecture
8.5.2 Image name and location
Acronis Snap Deploy 4 Master Image Creator can save an image in any of the following locations:
 In a network folder
 On an internal hard disk of the master machine
 On a USB or FireWire (IEEE-1394) storage device (such as a flash drive) that is attached to the
master machine
 On a DVD+R/RW, DVD-R/RW, CD-R/RW, or recordable Blue-ray Disc (BD-R, BD-RE) that is loaded
in the media drive of the master machine