4 states and results for machines – Acronis Snap Deploy 4 - User Guide User Manual

Page 129

129



Set label: Sets the label that is shown in the Machine column. For example, you can use the

network name of the machine as the label. If no label is provided, the Machine column shows

the MAC address of the machine.

11.4 States and results for machines

The State column shows the current state related to deployment.

The state can be one of the following:



Not ready: The machine is not connected to the deployment server; for example, the machine is

turned off.
For deployment to specific machines (p. 101), the deployment server will wake up the turned-off

machine when the scheduled time comes or when you start the task manually.
For deployment to any ready machines (p. 107), you will have to boot the machine into Acronis

Snap Deploy 4 Agent.



Ready: The machine is booted into Acronis Snap Deploy 4 Agent and is connected to the

deployment server, so the machine is ready for deployment.



In progress (shown as percentage complete): A deployment is currently being performed to the

machine.



Deployments denied: You excluded the machine from deployment (see the Deny deployments

(p. 128) action).

The Last result column shows the result of the last deployment operation on the machine.

The result can be one of the following:



Never deployed: No deployment has yet been performed on the machine since it was added to

the deployment server.



Succeeded: The deployment to the machine finished successfully.



Failed: The deployment to the machine failed. For example, no available license for performing

deployment has been found on the license server. If performing the deployment started but did

not finish successfully, the target disk or volume may be empty or contain inconsistent

information.



Canceled: You stopped the deployment task that was performing deployment to the machine

(see the Stop (p. 132) action). The master image was not deployed to the machine. The target

disk or volume may be empty or contain inconsistent information.