Acronis Snap Deploy 4 - User Guide User Manual

Page 34

Text mode
Original mode

1. Make sure that the CD or DVD drive has a higher boot priority than the hard disk drive. You may

need to open the BIOS setup utility of the machine and adjust the boot priority setting.

2. Boot the machine from the bootable media you created.
3. On the boot menu, click Acronis Snap Deploy 4 Agent.

4. In the pop-up window, click Cancel or wait until that window closes.
5. Make sure that the machine is ready for deployment. The window should look similar to the

following picture.

Details. The target machine becomes ready for deployment when it connects to Acronis Snap

Deploy 4 OS Deploy Server. This server is part of Acronis Snap Deploy 4. If the machine does not

connect to the server, you may need to adjust network settings, as described in “Booting the

target machines” (p. 108).

After the target machine is ready, you can deploy the master image to it.