Acronis Snap Deploy 4 - User Guide User Manual

Page 141

141

/ud_driver:

Specifies using Acronis Universal Deploy, and the mass-storage driver to be

installed. The driver is specified as an .inf file.

list
/filename:

Displays the image content.
When listing image content, volume numbers may not coincide with those

in the list of disks and volumes if the image does not contain all the

volumes.
For example, if the image contains only volumes 2-3 and 2-5, they will be

listed as 2-1 and 2-2.
If the deploy /partition command cannot find a volume in the image

by its physical number, use the list command to obtain the volume

number in the image. Then, use the /partition:

image> /target_partition:

volume> parameters.
In the example above, to deploy the volume 2-5 to its original place, use:

/partition:2-2 /target_partition:2-5

email_n
/email_from:

address>

Specifies the e-mail address of the sender. For example:

/email_to:

address>

Specifies the e-mail address of the recipient. For example:

/email_subject:

subject>

Specifies the custom text in the subject line of the e-mail message. For

example:

/email_subject:"Deployment notification"
In addition to the custom text, the subject line will include the text

“[ASD4]”, and the MAC address and the IP address of the machine being

deployed.

/email_smtp:

address>

Specifies the name or IP address of the outgoing (SMTP) server. For

example:

/email_smtp:smtp.example.com

/email_port:

port>

Specifies the port of the SMTP server. For example:

/email_port:465
Without this parameter, port 25 is used.

/email_user:

user name>

Specifies the user name to log on to the SMTP server. For example:

/email_user:user

/email_password:

server user password>

Specifies the password to log on to the SMTP server. For example:

/email_password:MyPassWd