Bio-Rad EXQuest Spot Cutter - Manual (Page 22)

SYSTEM INSTALLATION
2-9
7. Read and accept the License Agreement.
8. Click Next on the Read Me Screen.
9. Enter your Full Name and Organization and then click Next.
10. Select the installation directory and click Next.
11. Click Next and follow the rest of the on-screen instructions to complete the installation.
12. When the installation is complete, shut down the computer to complete "power off" and then power it
back on. Make sure the EXQuest spot cutter has been powered on and fully initialized before
starting the PDQuest or Quantity One software.
2.10 STARTING THE SOFTWARE
1. Double click the PDQuest or Quantity One desktop icon to start the software. Alternatively, from the
Start menu open the "All Programs/The Discovery Series" folder and select PDQuest or Quantity
One.
Figure 2-11. Software license screen.
2. To start the software in Basic mode, click Basic.
3. To run the fully featured version, make sure your HASP key is connected to a USB port before you
start the software.