Bio-Rad EXQuest Spot Cutter - Manual (Page 19)

SYSTEM INSTALLATION
2-6
Figure 2-6. Spot cutter USB ports and power entry module.
2.7 CUTTING HEAD INSTALLATION
There are two types of cutting heads available for the EXQuest spot cutter: gel head (standard) and
membrane head (optional). The gel head is supplied with both 1.0 mm and 1.5 mm inner diameter nominal
cutting tips. The membrane head is supplied with a 1.0 mm cutting tip.
2.7.1 Gel Cutting Head
Figure 2-7. Gel cutting head installation.