beautypg.com

Bio-Rad EXQuest Spot Cutter User Manual

Page 15

background image

Caution

The EXQuest spot cutter must be lifted, by two or more individuals, from its shipping pallet using the
removable lifting handles attached to the spot cutter. Do not lift the instrument from the lower front
bezel. The spot cutter must remain in an upright position at all times and be placed on a sturdy level
surface.

The EXQuest spot cutter is shipped with the following components:

EXQuest spot cutter

Camera

CD containing PDQuest and Quantity One Basic software (in separate package)

Power cord

USB cable

Bottles for DI water and waste (2)

Bottle holder

Gel cutting heads: 1.0 mm; and 1.5 mm

Gel cutting sheets (15)

Microplate rack

Gel tray

Gel/Blot clamps (4)

Calibration target

Calibration pucks (10)

9/64” Hex wrench

User manual

Packing list

Unpacking instructions

An installation kit comprised of: one fittings wrench, wrench for leveling feet, bubble level, four
blotting paper sheets, and four 96-well plates.

The following components will be shipped separately, if ordered.

Computer. Shipped in two boxes that will contain:

Box 1. Computer, keyboard, mouse, power cords, manual and system disks and

Box 2. 17" flat screen color monitor.

PVDF and nitrocellulose membrane cutting head. Includes:

Membrane cutting head,

Membrane cutting tip: 1.0 mm (1) (Caution, tips are sharp)

Cutting tip installation wrench (2)

Capless microtubes (1 pkg)

Packing list

If any parts are missing or damaged, contact Bio-Rad Laboratories immediately.

!

!

!

SYSTEM INSTALLATION

2-2

This manual is related to the following products: