Configuring an et weather station, Et reporting – Baseline Systems BaseStation 6000 User Manual
Page 66
BaseStation 6000 Site Controller Manual
58 |
P a g e
Configuring an ET Weather Station
A typical weather station includes the following meteorological sensors:
• Solar Radiation Sensor (pyranometer)
• Air Temperature Sensor
• Relative Humidity Probe
• Tipping Bucket Rain Gage
• Wind Sensor (anemometer)
The BaseStation 6000 software can read and display the data from the weather station and then use the data from that station
to obtain an accurate estimate of reference ET (ET
o
).
This functionality is coming soon…
Configuring Hargreaves Equation and a Rain Gauge for Weather Station Data
The Hargreaves equation typically requires only measured temperature data to calculate reference ETo. However, the
BaseStation 6000 enables you to combine rainfall data with the Hargreaves equation to factor a rain adjustment into the
system’s ET parameters.
This functionality is coming soon…
ET Reporting
This functionality is coming soon…