After you finish initial programming – Baseline Systems BaseStation 6000 User Manual
Page 44
BaseStation 6000 Site Controller Manual
36 |
P a g e
After You Finish Initial Programming
After you complete the initial programming tasks in the BaseStation 6000 system, you should run the system to ensure that it is
operating as expected.
If you want to manually operate individual zones, refer to Manually Running Zones on page 72.
If you need to make adjustments to your system, refer to the topics in the Programming Adjustments section of this document.
When your configuration is acceptable, and you want to leave the system in the Active status, click the Information tab on the
Main Page. Verify that the System Activity status says “System Active” and that the Run button is highlighted in green. Refer to
Understanding System Status and Color Coding on page 37.
IMPORTANT REMINDER! Leave both the software and the computer running at all times. If you shut down the BaseStation 6000
Site Controller software and/or the computer, your irrigation system will stop watering.